PickleballCentral Permanent Pickleball Net

The PickleballCentral Permanent Net will bring a smile to your face every time you realize it looks just as good after months of play as the day you got it. This enduring net was made to be used with the PickleballCentral Heavy-Duty Post Set so that you can attach it to the posts' crank system. Once installed, it can be quickly tightened to a proper pickleball height and kept ready for whenever you want to start a game. It's an ideal choice for both outdoor and indoor courts. A center strap is also included to further adjust the center height of the net if necessary.

The PickleballCentral Permanent Net uses 3.0 mm braided polyethylene rope with 1.5" knotted mesh that resists breakage. The band along the top is made of white vinyl that's been treated with mildew and UV-blocking inhibitors so you can leave it up when not in use. There are built-in grommets along the vinyl on all sides. The 5 mm steel coated cable ensures that nothing will damage it and keeps the net evenly balanced between posts.

The PickleballCentral Permanent Net is made to last and will give you plenty of opportunity to hone your gaming when using it.

CLICK HERE for information on installing posts.

RETURNS: A 15% restocking fee will be charged for all returned nets. Please call for return instructions.

SHIPPING: This product will be shipped via UPS.

PickleballCentral Pickleball Net
Official size: 21' 7" L x 2' 8" H
3 mm braided polyethylene
28 oz vinyl headband steel cable (approx. 32" of cable on each side of net for attaching to posts)
Cable free-floats inside of headband for easy adjustment
Cable is 27' long
1/2" fiberglass dowels


Installing Pickleball net on posts

• Begin installing your net by connecting the loop end of the net cable to the post cleat.
• Take the other cable loop and hook it into the pin on the crank assembly and begin winding.
• Continue to crank the post so that the net is at 34” at the center of the court.
• Fit Dowels/side stakes into the side pockets of the nets.
• Install lacing cord at each end by making a 2” knotted loop on one end of the lacing cord.
• Run the other end through both grommets in the headband and around the post through the 2” loop and back around the post in the opposite direction.
• Continue wrapping the cord around the post, tie off the cord at the bottom of the post.
• Repeat for the other post.